Towertalk
[Top] [All Lists]

Re: SPAM: RE: [BULK] - RE: [TowerTalk] Re: Cutting braid - InstallingPL2

To: Tower Talk <TOWERTALK@contesting.com>
Subject: Re: SPAM: RE: [BULK] - RE: [TowerTalk] Re: Cutting braid - InstallingPL259
From: Rick Scott <rickn7hj@gmail.com>
Reply-to: Rick Scott <rickn7hj@gmail.com>
Date: Mon, 17 Jan 2005 13:39:56 -0800
List-post: <mailto:towertalk@contesting.com>
On Mon, 17 Jan 2005 12:58:31 -0600, Keith Dutson <kjdutson@earthlink.net> wrote:
> Well, different strokes for different folks.  I have not had one single
> failure in about 200 PL259 applications.  That's 100 percent success.  Good
> enough for me.  BTW, this procedure is for the full size coax only, not 8X
> or 58.
> 
> Keith NM5G

Ditto Keith. Ive been doing it the very same way, wicking the braid
then using a tubing
cutter and have never had a failure.  Like you said different strokes and all.

What I always tell people, find what works for you and use it. 


Scotty N7HJ
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>