[TowerTalk] Re: TowerTalk Digest, Vol 26, Issue 4

[Bill Fuqua <wlfuqu00@uky.edu>]

Gee, I have never broken a stainless steel bolt. They have been too hard.
I have broken galvanized steel bolts. Particularly after they have rusted a 
bit.

73
Bill wa4lav




At 01:30 PM 2/1/2005 -0500, you wrote:

> I've been told by both the rotator repair men this.
> And many towertalkians have agreed.
>
> when that stainless bolt breaks or gauls.
> You will be swearing mightlily.
>
> Darn near impossible to drill out a broken stainless bolt without damaging 
> the threads.

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk