Thanks to all who responded. I now have a good PDF of the manual for this
tower. By the way, it appears that the PDF from HyGain/MFJ is corrupted.
Several people have reported that other manuals downloadable from HyGain are
missing lots of information, too - primarily the illustrations. So, be aware of
this possibility if you go get one of their manuals.
73,
Jim Idelson K1IR
email k1ir at designet.com
web http://www.k1ir.com
---------- Forwarded Message ----------
FROM: Jim Idelson <k1ir@designet.com>
TO: TowerTalk Post <towertalk@contesting.com>, YCCC <yccc@yccc.org>
DATE: Mon, 18 Jul 2005 10:15:44 -0400
RE: Info Needed - Telex HyGain HG37SS Tower
Hi all,
Does anyone have a copy of the manual for this tower - Telex HyGain HG37SS?
Over the weekend, W1VE and I removed this tower and some antennas at the QTH of
a silent key. I have the tower here and I'm considering installing it. The
winch is rusted and needs to be replaced, and I will need to come up with a
base mounting arrangement, since the original hardware remains embedded in
concrete at the QTH where we removed the tower.
This is a two-section crank-up tower. The lower section is about 14 inches on a
face, and the fully-extended height is about 38 or 39 feet. It has a rotor
plate and a bearing on the top plate [which may need to be refurbished or
replaced].
73,
Jim Idelson K1IR
email k1ir at designet.com
web http://www.k1ir.com
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|