Al. The X dimension reference is vague. The dimension the manual
refers to as X is actually the distance from the top of the radials to
the top of the base assembly. The manual shows that dimension as 46
1/2". It is not the distance from below the U-bolts to the top of the
base assembly as drawn.
73 John
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Elmer Tidmarsh
Sent: Saturday, August 13, 2005 5:25 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Need Hustler G7-144 2-Meter Ant. Dimensions
I think there is an error in the x dimension! Please send a correct
one.
thx Al
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers",
"Wireless Weather Stations", and lot's more. Call Toll Free,
1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|