I have a Rohn 45 TiltOver.
The arm needs to be straightened and reinforced.
I need to know about the cable, pulley, crank pieces.
Anyone rebuilt one of these using readily available
components who could share the specs, please?
If it impacts component choices, as I anticipate that
it does, I will only be tilting about 55 feet of tower
plus a 20 foot mast (15 feet out the top) with a Force 12
C3SS and a couple of other smaller beams or a beam and a
VHF/UHF vertical.
I would like to start locating and acquiring what I need
a little at a time (as the budget allows).
--
Thanks! & 73, doc kd4e
|_|___|_|
| | & | |
{|
/\ {|
/ \ {|
/ \ {|
/ @ \ {|
| |~_|~~~~|
| -| | |
============\ # http://bibleseven.com/kd4e.html
KD4E =========================================
West Central Florida
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|