I have been offered a CushCraft A3
and plan to use it on my tower fixed
to Europe. Anybody know where I can
purchase or otherwise acquire a manual?
Any tips on re-habbing/testing the beam
prior to installation? My inital plan
is to replace all the hardware/clamps,
scotchbrite and penetrox.
One other thing...the tower is 50'...I'll
have a two element Cubex quad at about 55'
in a square configuration. What sort of
spacing would prevent the A3 from interacting
with the quad?
Please reply off list.
Thanks!
Ray
ND8L
Youngstown (you godda prolem wid dat?), Ohio
___________________________________________________________________
Try Juno Platinum for Free! Then, only $9.95/month!
Unlimited Internet Access with 250MB of Email Storage.
Visit http://www.juno.com/value to sign up today!
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|