I recently aquired a hipot tester and tested the vacuum-capacitors I had
planned to use for matching my shunt-fed tower.
The high-voltage caps flunked.
I have two 5 KV caps of suitable capacitance that test well beyond their rated
voltage.
The several plans I have are all over the map as to what the voltage rating of
the matching caps should be.
My thought is that if I tune-up (the caps are to be motorized, and controlled
from the shack), using low power, the 5 KV caps should then be sufficient at
higher power.
Anyone have any practical knowledge on this subject?
73, Barrie, W7ALW
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|