Towertalk
[Top] [All Lists]

Re: [TowerTalk] mast slipping in Yaesu rotor

To: towertalk@contesting.com
Subject: Re: [TowerTalk] mast slipping in Yaesu rotor
From: Fred Roberts <froberts@ispwest.com>
Reply-to: w6tkv@arrl.net
Date: Mon, 24 Oct 2005 17:57:18 -0700
List-post: <mailto:towertalk@contesting.com>
Joe-

When I put up my KT34XA, I drilled a hole through the back of the bracket 
holding the 
mast, then threaded the hole and ran a screw into both bracket and mast.  It 
has held 
just fine.

73-
Fred, W6TKV

n4jbk@bellsouth.net wrote:

> Does anyone have any ideas about how to reduce the amount of slippage of my 
> mast in my yaesu G1000DXA?
> It is hard to torque the bolts down without cracking that cast aluminum 
> clamp.   Thanks, Joe N4JBK



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>