Towertalk
[Top] [All Lists]

[TowerTalk] yaesu rotor control question

To: towertalk@contesting.com
Subject: [TowerTalk] yaesu rotor control question
From: el34guy@aol.com
Date: Fri, 28 Oct 2005 12:16:38 -0400
List-post: <mailto:towertalk@contesting.com>
Im putting up an RD-1800 rotor using the Yaesu 1000 rotor control box and am 
getting great DC voltage(and rotation) going CCW, but when going CW(clockwise) 
voltage drops to 0 after about 1.5 secs so it almost stops immediately. Anyone 
had this problem before on the Yaesu controller? Any recommendations? Thanks 73
 
Mark
W0NCL 
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>