Towertalk
[Top] [All Lists]

Re: [TowerTalk] TowerTalk Digest, Vol 35, Issue 39

To: towertalk@contesting.com
Subject: Re: [TowerTalk] TowerTalk Digest, Vol 35, Issue 39
From: K7LXC@aol.com
Date: Thu, 10 Nov 2005 11:57:45 EST
List-post: <mailto:towertalk@contesting.com>
 
In a message dated 11/9/2005 2:44:39 P.M. Pacific Standard Time,  
towertalk-request@contesting.com writes:

kj0m@mchsi.com>
Subject: Re: [TowerTalk] US Tower Cables
To:  towertalk@contesting.com
Message-ID:  <8B97DD18-5259-401B-B7E0-2C75F74964C0@mchsi.com>
Content-Type:  text/plain; charset=US-ASCII; delsp=yes; format=flowed


On Nov 9,  2005, K7LXC@aol.com wrote:
>
>
>
>>   I guess my question is why you think the cables need  replacing  
>> in the
>> first  place?
>>
>


As an aside to this thread, just a week  ago today, my TX-472 MDPL re- 
nested itself in about 3 seconds when the  cable you're speaking of  
broke. I saw the whole thing happen. I was  raising the tower from  
inside my house with the remote, watching it  out my window. It was  
nearly fully extended and suddenly one of the  cables broke and the  
tower came back down very, very quickly. It's a  sickening sight to  
see, believe me! What appears to have happened is  a bad weld on a  
bottom brace, holding one of the pulleys, came  loose. This allowed  
the sheave to twist out of vertical and wedge  the cable. The winch  
just kept pulling until a cable snapped. When  the top 3 sections with  
2 Force 12 antennas hit the cement going  about 20-30 mph, obviously  
the tower stopped quite suddenly. The  antennas just kept going. Now,  
I've got many bent elements, a rotor  that doesn't function and a  
tower that US Tower will not tell me how  to re-cable. They'll sell me  
the cable set for ~$250 but won't tell  me how to string it, due to  
liability issues. Luckily, the insurance  carrier I have has listed  
this under my personal property, so even  though it was a mechanical  
failure, they will stand by the claim.  Now, I need to find someone  
that can help the adjuster determine  whether it's repairable or a  
total loss. My nearest US Tower  authorized repair company is in  
Wisconsin, about 300 miles away from  me here in SE South Dakota. Not  
to mention winter is coming on and I  don't relish all this repair  
work standing in the snow.

My  cables all looked fine on my tower. There was no rust anywhere, so  
I  don't know that you necessarily need to re-cable every 3 years. My   
tower is about 7 years old. There are lots of other problems that  can  
and do occur with these mechanical monsters. Being able to do  all you  
tower work on the ground has its distinct  disadvantages!

My biggest problem is finding someone to determine how  to proceed now  
that the damage is done.




_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>