Yaesu will do a good jon repairing your controller. They will take a long
time to get it back to you and will shock the crap out of you with the
repair price, but when you compare that to totally replacing the motor on
the tower plus the controller, maybe that's not so bad. Alternatively, you
can sometimes find replacement controllers on Ebay. Be sure the tower
mounted unit is working OK (you can send +/- DC voltage down the control
line to make sure it turns, and you can measure the resistance of the tower
mounted pot to make sure the resistance changes as the rotor turns. FWIW any
of the SD series controllers will work with any SD controller. If it doesn't
have an "X" in the logo, it won't do the preset function, but will otherwise
be compatible.
GL es 73
Dan
K0DAN
----- Original Message -----
From: "Jerry" <grf@uneedspeed.net>
To: "Tower Talk" <towertalk@contesting.com>
Sent: Sunday, November 13, 2005 1:52 PM
Subject: [TowerTalk] 800 SDX
> My contolle unit shot craps. Anyone know a repair service for Yaesu
> rotators beside Yaesu? If I have to end up with Yaesu, anyone had any
> luck with them regarding their rotators?
> Tnx
> Jerry
> K7LY
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|