See if this is what u want-James KB4RMN
http://www.ham.dmz.ro/icom/ic-746pro.php
----- Original Message -----
From: "StellarCAT" <RXDesign@ssvecnet.com>
To: "tower" <towertalk@contesting.com>
Sent: Thursday, November 24, 2005 10:57 AM
Subject: [TowerTalk] HELP...IC746PRO
>I know this is slightly off topic - but only slightly... I am, was using an
>Autek RF1 meter to
> determine my swr on a new F12 240N but the lengths are considerably
> shorter than the manual (and everyone else) says... and it is not working
> right... so Tom suspects the RF1 as the culprit... however I have no means
> of using my IC746PRO to test it as it will not transmit below the ham
> bands -
> is anyone aware of a fix to do this? I know for example on the TS940 all
> one
> had to do was to clip a diode.... is there a way to get out of band
> transmit
> for these rigs for testing antennas at 5W?
>
> g.
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|