Towertalk
[Top] [All Lists]

Re: [TowerTalk] 10m question - UPDATE

To: merlin-7@sc.rr.com, towertalk@contesting.com
Subject: Re: [TowerTalk] 10m question - UPDATE
From: "Mark ." <n1lo@hotmail.com>
Date: Thu, 08 Dec 2005 16:44:06 -0500
List-post: <mailto:towertalk@contesting.com>
Hello Merlin,

Hey, not bad! Congratulations on your first rotary dipole. Thanks for the 
links to the pics. Unfortunately, it will be a few more years before 10m 
starts to open wide again, but there are still sporadic openings.
>From the pic of your well-used work bench, I can see that you are a 
'builder'. It's almost as messy as mine!

--...MARK_N1LO...--

Merlin wrote:
<<  OK, I made my 10m dipole. I chose 7/8 aluminum angle for its light 
weight
and used aluminum rivets to fasten the angle to the fiberglass backing 
plate.
  It is a 1/4 wavelength antenna tuned for 28.450, I do not need a tuner at
all at this frequency but it will tune all of 10m with a tuner.  here is a 
few pics of it and my tower.
  Thanks again  KI4ILB   kilo india four I love beer  hi hi

http://carpetcareservices.homestead.com/KI4ILBTower.html >>


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>