Any ceramic capacitors in the circuit?
73
Gary K4FMX
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Bill Coleman
> Sent: Monday, January 23, 2006 10:28 PM
> To: Larry Phipps
> Cc: towertalk@contesting.com
> Subject: Re: [TowerTalk] SWR shifts with power
>
>
> On Jan 23, 2006, at 10:01 PM, Larry Phipps wrote:
>
> > I would suspect an intermittent connection... either a coax
> > connector or
> > maybe a joint between tower sections. You should bridge the sections
> > with straps. Also the rotator bearings should be bridged with
> > straps...
> > anything that could provide a marginal connection.
>
> I swapped out the coax with another line - same problem.
>
> I doubt the tower section joints are a problem, although the rotator
> might be interesting.
>
> I was thinking more like it might be a problem in the matching
> network itself.
>
>
> Bill Coleman, AA4LR, PP-ASEL Mail: aa4lr@arrl.net
> Quote: "Not within a thousand years will man ever fly!"
> -- Wilbur Wright, 1901
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|