Geoff asked:
>What is the best way to block a crankup before climbing it?<
I have successfully used 2 by 2 by 1/4 inch angle iron, and 1-1/2 inch diameter
galvanised pipe with a 1/4 inch wall. Let the sections all sit on something
solid.
73
Peter G3RZP
========================================
Message Received: Feb 10 2006, 02:12 PM
From: K6TFZ@aol.com
To: towertalk@contesting.com
Cc:
Subject: [TowerTalk] Blocking a Crankup
What is the best way to block a crankup before climbing it?
It would be down and almost nested except for top section
so that the rotator can be serviced.
Thank you. Geoff, K6TFZ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|