Towertalk
[Top] [All Lists]

[TowerTalk] yaesu rotor control box belt fix

To: "reflector cq-contest" <CQ-Contest@Contesting.COM>,"reflector -tower" <towertalk@contesting.com>, "YCCC" <yccc@yccc.org>
Subject: [TowerTalk] yaesu rotor control box belt fix
From: "David Robbins K1TTT" <k1ttt@arrl.net>
Reply-to: k1ttt@arrl.net
Date: Fri, 24 Feb 2006 21:17:51 -0000
List-post: <mailto:towertalk@contesting.com>
For those who may be interested, or who later search the archives, the
replacement o-ring I found for the g-1000sdx box (should also be the same
for g-2700sdx and g-2800sdx at least) is a 1-1/2x1-3/8x1/16 faucet o-ring.
Hillman part number 780068 at tractor supply co.  also listed as Faucet 1-4J
(I think, printing not very good, could be 1-4I or 1-41)  found in my local
tractor supply by searching through the little drawers that were in no
logical order under the muffler display.


David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>