> It appears that the m2or2800 clamp is a massive but poor >design. Have
> you modified yours?
> What suggestions do you have. I have two of those >rotators so any
> suggestion other than
> be prepared to re-clamp them will be greatly appreciated.
I had a rotor here that had a slipping problem so I drilled through the boom
and clamp and that held it. Only problem came when we had a really bad
windstorm, instead of slipping, it took the gears out in the rotor.
Tom W7WHY
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|