Towertalk
[Top] [All Lists]

Re: [TowerTalk] Transformer for 50 Mhz

To: kb0fhp@comcast.net, <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Transformer for 50 Mhz
From: Jim Lux <jimlux@earthlink.net>
Date: Wed, 15 Mar 2006 21:07:13 -0800
List-post: <mailto:towertalk@contesting.com>
At 07:06 PM 3/15/2006, D. Scott MacKenzie wrote:
>I was looking for a narrow band solution, and repeat it using different
>dimensions for 6M, 2M and 432...But I like the taper feedline solution -
>very nice.  Over what length must it taper?


Now you're asking really hard questions.  In the microwave world, we tend 
to use "several wavelengths", but that's a bit impractical with 6m.  Say, 
10 times the spacing?  But I'm just guessing.  There's probably a way to 
analyze it.


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>