[TowerTalk] T2X Wiring Question

["mike ryan" <mryan001@tampabay.rr.com>]

Hey Guys, I have just gotten back a T2X from Norm's.  He put the plastic
quick disconnect receptacle on the base plate so of course there are no
screw terminals any longer.  I wired the plug per the instruction sheet.
Question is, what is the correct wiring for the back of the control box
with the screw terminals? Is it the same as the wiring on the quick
disconnect plug, BLACK is Pin 1, WHITE is Pin 2 and so on?  Thanks for
reading.  - Mike
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk