Try looking for the wire they use for low voltage outdoor lights. The type
you put on decks and along walks. Its cheap and rugged. I have also used
10-3w/g for a LONG rotor run for high current prop pitch rotor... get the
stuff that is rated for outdoors or the outer jacket will get brittle and
crack in a couple years.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of doc
> Sent: Sunday, May 28, 2006 23:28
> To: towertalk@contesting.com
> Subject: [TowerTalk] Is this suitable for 150' rotator control?
>
> Would this cable be suitable for a 150-200ft
> run for typical rotator or remote switch control?
> (probably low voltage, e.g. 12vdc)
>
> Manhattan 4 CONDUCTOR 12 AWG THHN/THWN 600V (.437inch OD)
> DIRECT BURIAL TYPE TC SUN RES. $.95/ft
>
>
> --
> Thanks! & 73, doc kd4e http://bibleseven.com
> Florida Home w/Rohn 45 in concrete base & 10 acres for sale:
> <http://bibleseven.cjb.cc/cjb-steelhouse-index.html>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|