Towertalk
[Top] [All Lists]

Re: [TowerTalk] DO *NOT* WORK ON ANTENNAS DuringRainorwhyaliveelectricia

To: "K8RI on Tower talk" <k8ri-tower@charter.net>,"Daron J. Wilson" <daron@wilson.org>, <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] DO *NOT* WORK ON ANTENNAS DuringRainorwhyaliveelectricians are happily married
From: "Richard M. Gillingham" <rmoodyg@bellsouth.net>
Date: Thu, 29 Jun 2006 17:58:54 -0400
List-post: <mailto:towertalk@contesting.com>
Ah yes.  Remember, the pilot is the first to arrive at the scene of the 
accident!

Gil, W1RG
----- Original Message ----- 
From: "K8RI on Tower talk" <k8ri-tower@charter.net>
To: "Daron J. Wilson" <daron@wilson.org>; <TOWERTALK@contesting.com>
Sent: Thursday, June 29, 2006 5:44 PM
Subject: Re: [TowerTalk] DO *NOT* WORK ON ANTENNAS During 
Rainorwhyaliveelectricians are happily married


>
> ----- Original Message ----- 
> From: "Daron J. Wilson" <daron@wilson.org>
> To: <TOWERTALK@contesting.com>
> Sent: Thursday, June 29, 2006 4:01 PM
> Subject: Re: [TowerTalk] DO *NOT* WORK ON ANTENNAS During Rain
> orwhyaliveelectricians are happily married
>
>
>>> An electrician who has so little faith in himself he has to check his
>>> work?
>>
>> Hmm, that sounds a little smug.  As one in the field, when you spend 8-10
>
> It shouldn't have even needed a smiley.  I'm not an electrician and I 
> expect
> only the best from those who receive my money.
>
>> hours a day putting the same wires on the same screws and/or you have an
>> apprentice who you are teaching helping you, it is certainly not out of
>> the
>> realm of possibility that one might make an error.  What makes the
>
> I fly airplanes.  I even double check the mechanic's work even though he 
> has
> the rating and I don't. OTOH I guess threre's a lot of incentive to do so.
>
>> difference between the sloppy folks and the professionals is that the
>> professionals do test and make sure the installation is done correctly 
>> and
>> safely.  The simple three prong neon tester not only checks for the 
>> proper
>> polarity if you will, but also confirms the rest of the trades did not
>> damage your wire during finish work.  An oversized screw or nail in the
>> wrong spot can easily sever a ground in the home wiring environment, and
>> that is quickly and easily checked with a tester.
>>
>> I do hundreds of 'routine' terminations a week, but since I can't quite
>> walk
>> on water (yet), I still test.
>
> And...you sound honest. <:-))
>
> Roger Halstead (K8RI and ARRL 40 year Life Member)
> N833R - World's oldest Debonair CD-2
> www.rogerhalstead.com
>
>>
>> 73
>> N7HQR
>>
>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>