I'm interested in any site or pictures for a bending jig for bending
rebar. The jig should be able to handle 3/8 to 3/4" rebar.
I would also be interested in any hints on how to do the bending. I
suspect a 4ft pipe could be used as a bending arm if needed.
If anyone can point me to any info I would be appreciative.
-Freeman, N5FPP
"If you are going through hell, keep going."
-- Sir Winston Churchill
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|