Towertalk
[Top] [All Lists]

Re: [TowerTalk] Inverted vee characteristics

To: "Richard DiDonna NN3W" <nn3w@cox.net>
Subject: Re: [TowerTalk] Inverted vee characteristics
From: Bill Turner <dezrat@copper.net>
Date: Sat, 26 Aug 2006 11:21:27 -0700
List-post: <mailto:towertalk@contesting.com>
ORIGINAL MESSAGE:

On Sat, 26 Aug 2006 13:09:28 -0400, "Richard DiDonna NN3W"
<nn3w@cox.net> wrote:

>Is there an angle that is really too narrow for an inverted vee (i.e., less 
>than 90 or 60 degrees) that winds up making the antenna essentially two 
>verticals fed from the top?


------------ REPLY FOLLOWS ------------

You really should model it with EZNEC or a similar program, but I can
tell you this: Even at a 45 degree apex angle, an inverted vee is
almost perfectly omnidirectional. I'm thinking this is not good for
the driven element of a yagi configured like you have it because some
of the energy will be radiated off to the side of the yagi instead of
toward the desired direction. A conventional dipole driven element
radiates almost no energy directly off to the side.

I'm no great expert with this, but I'm pretty sure it won't work as
well as you are hoping.


-- 
Bill, W6WRT
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>