Towertalk
[Top] [All Lists]

Re: [TowerTalk] How is the best way to bend rebar

To: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] How is the best way to bend rebar
From: Cqtestk4xs@aol.com
Date: Sat, 26 Aug 2006 20:21:28 EDT
List-post: <mailto:towertalk@contesting.com>
 
In a message dated 8/26/2006 11:45:58 P.M. Greenwich Standard Time,  
jimlux@earthlink.net writes:

I'm  having a bunch of concrete work done for landscaping, and after 
watching  the guys bending and cutting rebar to go around curves and such, 
I'm never  bending rebar by hand or cutting it with a hacksaw  again.



Cutting rebar is a piece of cake using a 7 inch grinding blade in a  circular 
saw.  It takes about 15 seconds to reach about 2/3  through  and then just 
snap it at the cut.  I've done dozens of these and it's a  sure fire way to go 
for the average guy working with rebar.
 
Bill K4XS
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>