Where did you make those measurements?
If at the shack end of the coax, they are quite meaningless as to
antenna resonance.
The only way to get the correct measurements is AT THE ANTENNA.
Sorry, but too many guys/gals put their SWR meters at the shack end of
the coax and try to determine what the ANTENNA looks like from there.
It just doesn't work that way.
Don
N8DE
N2TK, Tony wrote:
> Ron,
> Mine resonates at
>
> 28.64 - 1.1:1
> 21.22 - 1.25:1
> 14.1 - 1.2:1
>
> Single feed.
>
> N2TK, Tony
>
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com]On Behalf Of Ron Feutz
> Sent: Friday, September 01, 2006 10:02 AM
> To: towertalk@contesting.com
> Subject: [TowerTalk] C31 - 1 feed line or 3
>
> TT'ers,
>
> I just ordered an F12 C31XR. I have been told by experienced users
> that the beam can be a pain to tune properly on 15 (high swr).
>
> I ordered the beam with single feed. Since then I have heard that
> the problem is less severe with the 3 feedline model.
>
> All inputs from experienced users will be welcomed.
>
> Thanks and 73,
>
> Ron KK9K
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|