> Also don't use a staple gun! I had some eager friends at a local
> non-profit who
> took it on themselves to install CAT-5 Ethernet in the building using
> this method. A world of trouble at 100 Mbit/s...
Ok I have to interject. The issue is not the choice of product for
securing the wire, it is the method.
Cable ties are fine, don't cinch them down to the point that they deform
the jacket.
Tape is fine, same rules.
Staples...while not generally approved for Ethernet wiring, are not
actually the real problem. Use of Arrow T25 or T37 type rounded crown
staples with the PROPER tension generally don't hurt the product. The
Arrow T59 is an insulated staple that won't over compress the jacket if
the wire is the correct size for the staple.
In general, it is over tightening the securing device that is the problem,
not the product itself.
73
N7HQR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|