Towertalk
[Top] [All Lists]

[TowerTalk] Kellums Grips

To: towertalk@contesting.com
Subject: [TowerTalk] Kellums Grips
From: Nick Pair <daweezil2003@yahoo.com>
Date: Wed, 6 Sep 2006 16:20:29 -0700 (PDT)
List-post: <mailto:towertalk@contesting.com>
Hi all,
   
  Most of the ones we use up here in north west are stainless steel and are 
purchased through the electrical distributors. They come in many types, even 
ones you can add to cables Alli ready strung without threading cable end 
through it. They also have a large variety of terminations all the way From the 
simple loops to threaded fittings you can thread into conduit couplings or 
fittings like T's or LB's. The pricing between a plated steel and the stainless 
is so small that the wholesale house just stocks stainless. Some utility 
companies use plated but they buy in bulk directly.
  If your frugal(as most hams like me are) you cam even make your own out of UV 
resistant 1/8 cord that will hold up as long as most non heliax  coax will. Two 
3 foot pieces and a little Scotch 33+ and you never have to worry about your 
coal slipping down and putting a strain on Ty Wraps.
  I would recommend these for any runs over 70 feet vertical and as a bonus 
they are great for pulling the coax up during installation.
  A win win situation for me.
  YMMV
   
  Nick 
  WB7PEK

                
---------------------------------
 All-new Yahoo! Mail - Fire up a more powerful email and get things done faster.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Kellums Grips, Nick Pair <=