Towertalk
[Top] [All Lists]

[TowerTalk] tiny tilt over

To: <towertalk@contesting.com>
Subject: [TowerTalk] tiny tilt over
From: "Jim Jarvis" <jimjarvis@verizon.net>
Date: Wed, 27 Sep 2006 03:15:33 -0400
List-post: <mailto:towertalk@contesting.com>

Valor or Comet made a motorized tiltover mount for
precisely this application.  Don't know if it's in their
current product portfolio or not.
Check your local HRO for details.

N2EA

Message: 2
Date: Tue, 26 Sep 2006 22:21:43 -0500
From: "Thomas Tow" <ttow1@charter.net>
Subject: [TowerTalk] tiny tilt over
To: <towertalk@contesting.com>
Message-ID: <000501c6e1e4$10a045d0$6401a8c0@HP>
Content-Type: text/plain;       charset="us-ascii"

Ok, almost on subject. I need a 12v actuator with a small throw of a 8-10"
to lift my "tiny tower" :). Will be used to push up a small screwdriver
antenna on a mag mount plate on top of an suv..so I can lower it to get into
the garage without taking it off every time. I have checked McMaster
Carr..nothing I can find. Saw one at a hamfest already made but cannot find
the parts.
Off reflector is fine if this is too far off topic...it is kinda like a mini
tilt over tower :)   Don't know where else to ask.
73, Thanks, Tommy WD4K



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>