They might be Rohn EP2534-3 's . They are equalizer plates. One hole in one
corner and three holes along the opposite side. Meant to attach to the guy
anchor at the single hole and the guy wires connect to the other three. It
provides a single mounting point for multiple guy wires and swivels to equalize
the pull on the guy anchor. They were also made with 5 holes on one side for
larger installations.
Clint - W5CPT
----- Original Message -----
From: Dennis King
To: towertalk@contesting.com
Sent: Friday, October 06, 2006 12:38 PM
Subject: [TowerTalk] Unknown tower components
I recently purchased a Rohn 25 Fold over tower from a ham in the SF Bay area
and received 8 triangular galvanized metal pieces about 8" on a side and with
about 4 bolt holes and several large galvanized bolts. Are these necessary
parts for the Rohn 25 tower? Where and how are they used??
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|