Lee Buller wrote:
>
> I've been researching 6-meter antennas and found a lot of nice
>construction articles out there for 3 and 4 element antennas. Well,
>running out of time, I purchase a Cushcraft A50-3S for a good price.
>In my research, alot of people used a 5-inch diameter roll of coax with
>5 turns as a choke balun. Is that needed? I understand what it is
>doing on the antenna, but gee.....its 6 meters. The Cushcraft has a
>gamma match feed. I just don't see the coax radiating that much with
>just a 100 watt transceiver.
>
> Just wondering?
Just wondering what you mean by "Gee... it's 6 meters"? Radiation from
the coax when transmitting is only a small part of the story on this
band.
On receive, 6 meters is a lot quieter than most people can begin to
imagine - they're not aware of how badly their receiving capability has
been affected by pickup of local noise, computer spurs and other
man-made garbage. They think that's just how the noise level is on 6
meters.
A feedline choke, along with everything else you can do to prevent RF
currents where they don't belong, can produce amazing results in some
situations.
As for the gamma match, it just doesn't seem a good idea to make a
deliberate connection between the coax shield and the boom, the mast and
the tower. On the contrary, it seems like an open invitation for RF
currents to flow all over the metalwork; and on receive, to pick up
unwanted noise and feed it into the coax.
There are many other ways to match a yagi, that also avoid noise pickup
on the feedline and other metalwork.
--
73 from Ian GM3SEK 'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.co.uk/g3sek
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|