Use a piece of flat aluminum plate, bending it to the correct angle and
put screws through the plate into the side of the plastic relay box.
Then mount the aluminum plate to a tower leg with a U-bolt.
Don
N8DE
Jim Lux wrote:
>Does anyone know of a source for a replacement for the plastic box
>that goes over a RCS-8V switch? I'm looking for something that isn't
>tapered, but has the same 4 15/16" by 6 7/16" faceplate with the
>mounting holes in the corners. Needs to be 2" deep (inside).
>
>I want to mount the switch using the side of the box, and the darned
>tapered edge is a pain. I've got 4 of them, so before I launch into
>a fabrication effort to make some sort of bracket, I thought I'd ask around.
>
>Jim, W6RMK
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|