Towertalk
[Top] [All Lists]

Re: [TowerTalk] Managing Balanced line transitions

To: w1ael@arrl.net
Subject: Re: [TowerTalk] Managing Balanced line transitions
From: "Rick Karlquist" <richard@karlquist.com>
Reply-to: richard@karlquist.com
Date: Fri, 2 Feb 2007 14:59:45 -0800 (PST)
List-post: <mailto:towertalk@contesting.com>
Allan H. Kaplan wrote:
> I would recommend NOT using baluns in connection with open wire line.
> It's hard to guess what impedance they would see at a particular
> frequency location along the line, and they do not work well nor with
> low loss when they are mismatched.  In general, they will always be
> mismatched in your situation!  For the coaxial sections you contemplate,

OTOH, in my situation, they are always matched and see something
close to 450 ohms.  I put the tuner at the antenna.  I wouldn't
recommend running 350 meters of OWL in a mismatched condition due to the
increase in loss and decrease in bandwidth.

Rick N6RK

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>