Jack, looking at the ROHN catalog I have here, they only show 45G specs for
tilt over at the 44, 54, and 64 foot heights. At 64 feet the hinge is
positioned at 29 feet. Don't know if this is the max height recommended for a
tilt over, as they don't spell that out anywhere. For 44 and 54 feet it goes at
19 feet. It also must be bracketed or guyed at the hinge point. Hope this helps
you decide what needs to be done. Larry Albrecht K0IS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|