Towertalk
[Top] [All Lists]

[TowerTalk] Fw: SteppIR problem...size wires? ala KH6

To: <towertalk@contesting.com>
Subject: [TowerTalk] Fw: SteppIR problem...size wires? ala KH6
From: "Ron Todd" <ron@k4wz.com>
Date: Mon, 18 Jun 2007 17:14:25 -0400
List-post: <mailto:towertalk@contesting.com>
WOW !!!  Look on QRZ.com at     KH7XS,     Now that will be a nice set up.
My son is stationed at Pearl, I may need to come see him. Need any ground 
help.



----- Original Message ----- 
From: "Kelly Johnson" <n6kj.kelly@gmail.com>
To: <john@kk9a.com>
Cc: <Cqtestk4xs@aol.com>; <TOWERTALK@contesting.com>
Sent: Monday, June 18, 2007 4:56 PM
Subject: Re: [TowerTalk] SteppIR problem...size wires? ala KH6


> Would it be possible to locate the SteppIR controller at the base of
> the tower and remotely control the controller itself from the shack?
> I think there are software programs that allow you to control the
> controller via computer.  You could have a computer at the base of the
> tower connected to the SteppIR controller.  The computer could then be
> remotely connected to a computer in the shack via ethernet cable,
> WiFi, or whatever.
>
> I'd consider something like this before I gave up on that dream 150' tower 
> :-)
>
> Can I visit sometime?  :-) :-)  I sure love Hawaii!
>
>
>
> On 6/18/07, john@kk9a.com <john@kk9a.com> wrote:
>> Bill, I would be very concerned about using a 650' control cable for this
>> antenna after reading about all of AH6FC's problems with a four element
>> SteppIR and a 500' cable.   You'll need the factory to assure you that 
>> this
>> antenna is designed to work with such a long cable before purchasing it 
>> and
>> shipping it to Hawaii.
>>
>> John KK9A
>>
>>
>>
>>
>> To: TOWERTALK@contesting.com
>> Subject: [TowerTalk] SteppIR problem...size wires? ala KH6
>> From: k4xs
>> Date: Tue, 12 Jun 2007 02:32:36 EDT
>> List-post: <mailto:towertalk@contesting.com>
>>
>> I have been following this thread with great interest.....
>>
>> My house out here in KH6 should be finished by July and I hope to get my
>> tower up after that.  My permit has been approved for a 150 footer.   The
>> only
>> problem is in order to get it to that height approved by the county I 
>> had
>> to
>> position the tower about 500 feet from the house.  (long story...the
>> numbnuts
>> in the building dept are afraid of it falling over sideways exactly 150 
>> ft)
>> Loss is not too big a problem since I plan on using 7/8 inch  Heliax.
>>
>> However, I am planning to run three SteppIRs...two 4 el and one MonstIR 
>> at
>> 29, 56 and 90+ feet in phase, with a smaller tribander (maybe an A-3 or
>> whatever  I can scrape up and a M2 for 40 at 150 ft.
>>
>> My question is this...what gauge wire is SteppIR selling for their longer
>> runs?  I have a bunch of very nice stuff (rat shack with braided cable
>> (several
>> thousand feet, packed away somewhere in boxes I plan on using).
>>
>> I could bring the tower closer to the house but that would mean shrinking
>> it
>> progressively as it gets closer to the house, since the lot is kinda 
>> wedge
>> shaped and get narrower where the house is.
>>
>> Bill KH7XS/K4XS
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Fw: SteppIR problem...size wires? ala KH6, Ron Todd <=