Towertalk
[Top] [All Lists]

Re: [TowerTalk] Quad Wire

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Quad Wire
From: "Matt Patterson" <mattpatt@1starnet.com>
Date: Tue, 19 Jun 2007 07:37:07 -0500
List-post: <mailto:towertalk@contesting.com>
Back in the day, when I had a 2 element lightning bolt quad they used 
aluminum welding wire for the radials.  You can get it at Home Depot.


73 Matt
W5LL

----- Original Message ----- 
From: <NPAlex@aol.com>
To: <towertalk@contesting.com>; <videorov@verizon.net>
Sent: Tuesday, June 19, 2007 7:35 AM
Subject: [TowerTalk] Quad Wire


> From: "JACK KZ4USA" <videorov@verizon.net>
> Subject: Wire for Quad
>
> #14, 7 strand hard drawn copper wire from Davis RF. Is this good wire for 
> my
> 20 meter 6 El Quad project?
>
> What are most people using for their Quads?
>
> Jack
> KZ4USA
> ==============================
>
> Jack,
> #14 hard drawn is an excellent choice.  It is the same type that CUBEX 
> QUADS
> use.
>
> Regards,
> Norm W4QN
>
>
>
> ************************************** See what's free at 
> http://www.aol.com.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>