Towertalk
[Top] [All Lists]

Re: [TowerTalk] Tilting tower query

To: "John Tait" <johnei7ba@eircom.net>
Subject: Re: [TowerTalk] Tilting tower query
From: "Rick Karlquist" <richard@karlquist.com>
Reply-to: richard@karlquist.com
Date: Fri, 13 Jul 2007 11:21:30 -0700 (PDT)
List-post: <mailto:towertalk@contesting.com>
There are a lot of windmill monopoles for sale on the web
that use this method of tilt up.  Suggest you read about
them.  I've used this technique many times.  The "rigging"
matters a lot.  The other pitfall is that the "stub mast" (also
known as a "falling derrick") can buckle.  This buckling is
encouraged if it sags from its own weight.  The fix for this
is to put a mid span guy on it connected to the tower.

One fortunate aspect of buckling is that if the falling
derrick is going to buckle, it will do so as soon as you
try to lift off the tower.  Always lift the tower a foot
or so and check for buckling.

If you have a big yard, like I do, where you have room to
lay down a tower, I highly encourage this methodology.

On my web site (www.n6rk.com) there are photos of my 50 ft
Glen Martin tower being erected with a falling derrick.

Rick N6RK





John Tait wrote:
>
>
> Barry Kirkwood wrote:
>> Greetings:
>> Has anyone experience or comments on non telescoping tilting towers?
>> That is: A rigid tubular or lattice mast with a stub mast and hinge.
>> In the down posture looks like an assymetrical seesaw.
>> Remember years back in a photo in the front pages of QST saw one of
>> tubular
>> steel maybe 100ft tall.
>> In my case have a rugged lattice tower, 6x 10ft sections, wondering
>> about
>> making it a tilt tower.
>> Would value any opinions, reports on experience before I spend money on
>> calculations by a professional engineer.
>> tnx es 73
>> Baz ZL1DD
>>
>>
> In one of the old ARRL handbooks, there was  a design for a tiltover
> tower made of well casing. I've drawn a pic from memory at
> http://www.iol.ie/~bravo/Well%20Casing%20Tower.htm. A friend EI9FE,
> successfully built a scaled up version of this, in the region of 90ft .
>   Vy 73
>      John EI7BA
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>