Towertalk
[Top] [All Lists]

Re: [TowerTalk] Antenna ID

To: towertalk@contesting.com (TowerTalk),James Enix <jamenbafre56@yahoo.com>
Subject: Re: [TowerTalk] Antenna ID
From: n7ka@comcast.net
Date: Thu, 26 Jul 2007 20:40:23 +0000
List-post: <mailto:towertalk@contesting.com>
I agree with Hector, XER2K.  It appears to be a TELREX TB4EC. Thisantenna is a 
2el tribandeer 10/15/20M . Telrex catalog from 1988 has it listed but states 
boom is 8ft long.

It is not pictured in the catalog, onlythe larger TB6EM (a 6el tribander).

The picture of antenna on the ground is possibly wrong in element placing.  It 
is most likely a driven element with separate reflectors for 10/15/20M.  The 
element with 2 traps (right side in picture) is the driven element.  Next 
element to left would be the shortest element 18" 5"(10M), next element would 
be the mid sized 24' 5"is for 15M, and the last/longest element 33" 6" element 
to left in picture would be for 20M.  The other triband antennas each used 
separate reflectors and trapped driven element an trapped directors (the TB6EM 
had an additional separate driven element for 10M so it was 3el on 20M, 3el on 
15M, and 4el on10M (I owned one of these in 1967-1975 but it was called a TM30C 
then).

TELREX has been out of business for a number of years and parts MIGHT very 
scarce to locate.  If the black box (a type of balun for matching to feedline) 
is good and the traps are good it is possible you might have a working 2 
element antenna.  It was rated a 1KWP.  This rating most likely a carry over 
from AM days and if so I would not run this antenna at more than 1KW from the 
amp.  If the brown epoxy coating of the traps is cracked you can expect water 
damage to the coil and capacitor inside. At that point I would consider it a 
good source of aluminum for building some antenna project.  I was given 2ea of 
TELREX TB5EM with cracked epoxy traps and they are aluminum for projects.

BTW, the antenna listed for $199.95 in 1988.

Good luck with your antenna.

Arne N7KA

-------------- Original message -------------- 
From: James Enix <jamenbafre56@yahoo.com> 

> Hi, I am new to Towertalk. 
> 
> I have been given an antenna that I need some help with identifying. 
> 
> I would like to get it to work but do not know what is or what parts I need 
> to 
> replace. This is the web site for the photos of the antenna are. The antenna 
> is on the ground, has four elements and four traps. The beam is 9' 5" long, 
> the 
> element with the balun (Black box) is 28' 2", 2nd element from that is 24' 
> 5", 
> 3rd element is 18' 5", and 4th element (parts missing) is approximately 33' 
> 6" 
> long. 
> 
> Looks like it is a 10, 15, 20 meter system with the parasitic elements acting 
> as reflectors since these are about 5% longer than the calculated length 
> required for the three bands. 
> 
> This is the site that I have the photos loaded on. 
> http://s201.photobucket.com/albums/aa212/jamenbafre/ 
> 
> Thank you for your help, 
> 
> Jim 
> KC0QIE 
> 
> 
> 
> --------------------------------- 
> Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel 
> and 
> lay it on us. 
> _______________________________________________ 
> 
> 
> 
> _______________________________________________ 
> TowerTalk mailing list 
> TowerTalk@contesting.com 
> http://lists.contesting.com/mailman/listinfo/towertalk 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>