Towertalk
[Top] [All Lists]

Re: [TowerTalk] Radials

To: "Dubovsky, George" <George.Dubovsky@andrew.com>,"James Bloomfield" <rn23crna@windstream.net>,<towertalk@contesting.com>
Subject: Re: [TowerTalk] Radials
From: "jeremy-ca" <km1h@jeremy.mv.com>
Date: Fri, 27 Jul 2007 12:34:00 -0400
List-post: <mailto:towertalk@contesting.com>
Very true! I do a fair amount of MIG welding and the wire has a short spool 
life if left inside an unprotected garage. I can imagine instant rust 
outside.

Carl
KM1H


----- Original Message ----- 
From: "Dubovsky, George" <George.Dubovsky@andrew.com>
To: "James Bloomfield" <rn23crna@windstream.net>; <towertalk@contesting.com>
Sent: Friday, July 27, 2007 12:01 PM
Subject: Re: [TowerTalk] Radials


> You can, but you are really putting down just steel wire. The copper is
> the thinnest of flashes, just enough to keep the steel wire from
> oxidizing in protected environments. It won't survive outside any better
> - and probably worse - than galvanized electric fence wire (which is a
> whole lot cheaper!)
>
> 73,
>
> geo - n4ua
>
>> -----Original Message-----
>> From: towertalk-bounces@contesting.com [mailto:towertalk-
>> bounces@contesting.com] On Behalf Of James Bloomfield
>> Sent: Friday, July 27, 2007 11:54 AM
>> To: towertalk@contesting.com
>> Subject: [TowerTalk] Radials
>>
>>
>>
>> In the planning stage for my 90 foot insulated Rohn 25 I am at the
>> planning
>> for radial stage.
>>
>>
>>
>> Everyone knows the current price of copper.
>>
>>
>>
>> I plan to have 120  1/4 wave radials.
>>
>> Two questions.
>>
>>
>>
>> Can I use copper clad welding wire - 0.30 Dia.?
>>
>>
>>
>> If yes then how do you calculate the length of wire when sold by the
>> pound?
>>
>>
>>
>> Jim
>>
>> KV4FE
>>
>> On the Suwannee River
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
>
> ------------------------------------------------------------------------------------------------
> This message is for the designated recipient only and may
> contain privileged, proprietary, or otherwise private information.
> If you have received it in error, please notify the sender
> immediately and delete the original.  Any unauthorized use of
> this email is prohibited.
> ------------------------------------------------------------------------------------------------
> [mf2]
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>