I have used Loctite many times on stainless steel hardware and it seems to
harden. What do you mean by "it won't cure"?
To: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Subject: Re: [TowerTalk] Fw: Rohn 45 Question
From: Charles Gallo <Charlie@TheGallos.com>
Reply-to: Charles Gallo <Charlie@TheGallos.com>
Date: Wed, 29 Aug 2007 03:10:53 -0400
List-post: <mailto:towertalk@contesting.com>
<snip>
BTW for those of you who say "Loctite cures due to lack of oxygen" - that's
partly right It won't cure unless there is no oxygen, but it also needs a
certain amount of ions (don't remember if it's + or -) anyway, that is what
the
loctite primer is for - if you are working with passivated stainless, please
use the primer, or it won't cure
--
73 de KG2V
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|