Towertalk
[Top] [All Lists]

Re: [TowerTalk] HF Vee Beam Experience?

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] HF Vee Beam Experience?
From: "Al Williams" <alwilliams@olywa.net>
Date: Thu, 13 Sep 2007 13:55:13 -0700
List-post: <mailto:towertalk@contesting.com>
Interesting-I was at kl7aiz when the ham installation was setup (1950/1951). 
This was in a building, can't remember if it was a quonset hut, down by the 
water which we called "clam lagoon".  During early 1951 we moved from the 
quonset huts up to the large dormitory like buildings.  I have photos of the 
ham station if anyone is interested.

At that time we had no rhombics for ham use.

k7puc


----- Original Message ----- 
From: "Chet Moore" <ChetMoore@cox.net>
To: "Rick Stealey" <rstealey@hotmail.com>; <k4tmc@aol.com>; 
<towertalk@contesting.com>
Sent: Thursday, September 13, 2007 10:13 AM
Subject: Re: [TowerTalk] HF Vee Beam Experience?


Rick,

OK, I'll bite.   How well does it work    I used a rhombic up at KL7AIZ that
was 500 feet per leg, terminated at the far end..  That one loaded on all
bands and was dynamite.  A rhombic at this QTH is not feasable.

Press on regardless

73

Chet N4FX
----- Original Message ----- 
From: "Rick Stealey" <rstealey@hotmail.com>
To: <k4tmc@aol.com>; <towertalk@contesting.com>
Sent: Thursday, September 13, 2007 10:11 AM
Subject: Re: [TowerTalk] HF Vee Beam Experience?


>
>>terminating resistors?
>
> Hi Henry,
> I homebrewed one a year ago, on the way to building a Rhombic (first half
> of
> my rhombic).  It didn't do much for me in the way of excitement so I
> completed the Rhombic project and then only needed one terminating
> resistor.
>  I was looking for a 500 watt 600 ohm resistor, and you are right, they
> aren't common items.  I checked with a company called Carborundum I think
> it
> was, who make Globar resistors but they wanted something well over $100
> for
> it.  Had to get them to "quote" my request, couldn't get a price from
> their
> web site.  So I looked for alternatives and an interesting alternative was
> to get a 50 ohm dummy load and use a balun (an un-un in the case of a vee
> beam since you are connecting to ground) like a 9:1 type to match the 50
> ohms up to 450 ohms.
>
> As to performance...  that's another subject, that's not what you asked,
> is
> it?
>
> Rick  K2XT
>
> _________________________________________________________________
> Get a FREE small business Web site and more from Microsoft® Office Live!
> http://clk.atdmt.com/MRT/go/aub0930003811mrt/direct/01/
>
>


--------------------------------------------------------------------------------


> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>