Hoisting grips at the top.
www.andrew.com/search/BN_237409.aspx
Snap in hangers going down the tower sure looks good and its easy to add
more
by stacking them.
http://www.andrew.com/products/trans_line/heliax/snapstak.aspx
But, the clamps and cable ties also work.
73 Dave
n4zkf
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of richard allen
Sent: Tuesday, October 16, 2007 6:51 PM
To: towertalk@contesting.com
Subject: [TowerTalk] hanging Heliax
I am about to install two runs of 7/8 Heliax (LDF5) and three of 1/2 Heliax
(LDF4) going up a 55 foot tower.
Can I use hose clamps to secure the cable?
Can I use lots of heavy plastic tie wraps (1/2" wide)?
Can I use the hose clamps around the connector for grounding at the top or
do I need to use the Andrews grounding kits?
Any suggestions would be appreciated.
Thanks,
Richard W5SXD
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|