The RoHS stands for "the restriction of the use of certain hazardous
substances in electrical and electronic equipment" It is marked on many
things I buy lately, including some cable that I used for rotator wire.
John KK9A
To: "'Tower Talk List'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] DIN Connectors You Can't Solder To
From: "David Robbins K1TTT" <k1ttt@arrl.net>
Reply-to: k1ttt@arrl.net
Date: Sat, 17 Nov 2007 17:36:53 +0000
List-post: <mailto:towertalk@contesting.com>
First, what is RoHS???
Most likely they are plated with chrome. I would take some fine sandpaper
and scratch the plating of the top of the pins, that at least gives a little
area to tack onto. If the pins have a hollow on the back like most of them
find a drill or jeweler's file that fits in there and scrape out the plating
also. This also works for chrome plated pl-259's since most all of these
types of things are just plated brass.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|