Also, make sure you check the worm screw with the magnet as there are some
Chinese made clamps with low grade stainless with mild steel worm screws.
Buy USA manufactured if possible.
Mike
-----Original Message-----
ORIGINAL MESSAGE:
On Mon, 3 Mar 2008 07:11:20 -0600, "Artmouton" <k5fnq@cox.net> wrote:
>1. Do I just change all of the hose clamps?
------------ REPLY FOLLOWS ------------
If you suspect you have both stainless and non-stainless hose clamps,
you can use a magnet to tell the difference. Good quality stainless is
non-magnetic. Change any that fail the test.
73, Bill W6WRT
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|