As for getting the sections put together, if it's new sections you are dealing
with then possibly the galvanizing is a bit thick around the female part, or
the lower section. Just file it lightly, especially it seems around the bolt
holes as this is where it will usually build up. If the tower has been together
before it's also likely that the male and/or female parts are a bit out of
round from the bolts being tight so just take a good size channel lock (water
pump pliers) and squeeze them back to shape some. They should go together
snuggly but still fairly easily.
Larry K0IS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|