Towertalk
[Top] [All Lists]

Re: [TowerTalk] Guy Wire Formula?

To: Alain Michel <opalockamishabob@yahoo.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] Guy Wire Formula?
From: Bill MacLane <ai4wm@yahoo.com>
Date: Tue, 1 Apr 2008 18:24:36 -0700 (PDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Alain,
I forgot to mention that you could guy 30 ft. out from the base if you want.

Also, if you buy dacron rope in 500 ft. spools one spool will make a complete 
set of guys for one mast.  You still need a halyard.

Finally, to figure the guy length it isthe square root of the height of the 
anchor squared plus the distance from the base to the anchor squared.  I think 
that is what you intended to write.  However I don't know how to make the 
formula in email.

73,
Bill
AI4WM

Alain Michel <opalockamishabob@yahoo.com> wrote: Hello All!

I am in the process of erecting a 40'+ mast to support the feedpoint of my 
G5RV. I was initially planning 3 wires [Dacron rope] at each level. Should I 
use 4?

Using A2+B2=C2, how far out from the bottom of the mast should the guys be 
fastened to the ground? I plan on guying the mast at the 20', 30' and 39' 
levels.



All suggestions will be most gratefully received!

73,

Alan...KI6HPO

       
---------------------------------
You rock. That's why Blockbuster's offering you one month of Blockbuster Total 
Access, No Cost.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



73,
Bill
AI4WM
       
---------------------------------
You rock. That's why Blockbuster's offering you one month of Blockbuster Total 
Access, No Cost.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>