Hi all,
I have an inverted L for topband running off a DX Engineering radial
plate. The vertical portion of the radiator is offset about 5 feet or
so from the radial plate. I couldn't place the plate under where the
wire goes up the tree due to boulders or concrete or something about
8" under the soil there. What that leaves is the radial plate mounted
to a short pole in the ground with nothing above it, and just a
single strand of #14 insulated copper-clad steed radiator a few feet away.
What would likely result if I put up a Butternut HF2V for 40 and 80
that close to the 160m L? Worth doing or am I just asking for
problems. It's also about 30 or 40' away from my K9AY loop. Short of
buying a bigger lot, do I have a hope of making this work or should I
just stick to what I have now?
Regards,
Peter,
W2IRT
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|