Depending where he is - I would recommend the K1FO D505S - very modest and
equal performance to 6M5X, but built a bit better for the northeast. Try
Directivesystems.com
Scott
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of David Gilbert
Sent: Tuesday, July 08, 2008 12:25 PM
To: Chuck Sudds
Cc: Towertalk@contesting.com
Subject: Re: [TowerTalk] HF & 6M beams
Personally, I think you'd get better performance at lower cost by simply
putting a modest 6m yagi above whatever HF yagi your friend can afford.
For example, the M2 6M5X would give him 5 elements for about $300 new, and
it wouldn't add much strain ( 9 lbs weight and only 2.2 sq ft wind surface
area) to any decent tower or mast. I doubt he'd find any combo antenna that
would compete with that .
73,
Dave AB7E
Chuck Sudds wrote:
> Greetings Towertalkians!
>
> A friend of mine is looking for a small beam-type antenna that covers 20M
> thru 6M. I mentioned the SteppIR to him but it carries too large of a
> price tag & I'd really like to see him be able to get back on the air.
>
> Does anyone have any other ideas for a commercially manufactured HF & 6M
> beam? Thanks!
>
> Chuck KØTVD
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|