Hmm, thought I said that yesterday. :)
Glad to know you could measure it with the 269 though. I have someone
needing too.
Dave
n4zkf
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Ray' Email
Sent: Thursday, July 17, 2008 1:07 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Cushcraft A3S 10M trap info
Thanks to all for the ideas, suggestions and comments.
I spoke with John, the Cushcraft amateur radio rep today, He says that the
length extending out of the 10M trap is not standard. During production of
the A3S, the lengths would vary. The only way to tell the boom end of the
10M trap; it is the end with the self tapping screw that holds the outside
trap sleeve to the element tubing.
I re-assembled the A3S today and measured it with my MFJ 259. It resonates
on each band as it should.
Ray,
N6VR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|