I have some Belden 9405 rotator cable which contains two wires of 16 AWG and
6 wires of 18 AWG.
Where should the 16 AWG wires be used - the CW and CCW pins? I'm thinking
CW and CCW since those appear to provide current to the motor. POS, POT &
GND seems to be for reading position off the Potentiometer.
73,
Michael - K5MEF
--
We are what we repeatedly do. Excellence, then, is not a single act, but a
habit. -- Aristotle
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|