Dick Green WC1M wrote:
> Try Hill Radio: www.hillradio.net
>
>
>
>> -----Original Message-----
>> From: STEPHEN L SALA [mailto:k7awb@msn.com]
>> Sent: Monday, September 08, 2008 5:08 PM
>> To: towertalk@contesting.com
>> Subject: [TowerTalk] small Rohn parts
>>
>> I called Rohn today and asked where to buy their small parts such as
>> U-bolts and palnuts. They said they had a $300 minimum charge so good
>> luck. I asked them if any of their dealers specialized in small part
>> sales and the Proj Manager did not know. I have a Rohn 45 rotator
>> plate AS455 which I have misplaced the 6 U-bolts. I cannot find the
>>
If you have a "fastener" company near by take the plate in as ask for
some galvanized U-bolts to fit.
You might even find them at the big box stores. These bolts are not
individually under a great deal of stress so even ungraded should be
strong enough.
73
Roger (K8RI)
>> exact size in McMaster Carr and none locally. Does anyone know of a
>> Rohn parts dealer? Texas Towers said they only sell what is on their
>> web page.
>>
>> Stephen L. Sala (Steve) K7AWB Nine Mile Falls, WA DN17es
>>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|